游泳需要很多肌肉。
但MIT的工程师发现,只要设计得当,即使单层肌肉细胞也能在水中产生动力。在发表于《Advanced Functional Materials》的论文中,团队展示了一种薄型肌肉驱动游泳机器人的设计。这个水下机器人的骨架由一层凝胶薄膜制成,长度和宽度大约相当于一根口香糖。凝胶的两半构成机器人的鳍,每侧鳍覆盖着一层活体肌肉细胞,厚度远小于一根头发丝。这些细胞经过基因工程改造,能对光产生反应而收缩。当研究者照亮一侧鳍时,其表面的肌肉收缩,使整片鳍拍动,产生足够的力将机器人拖过水面。通过在两侧鳍上以不同间隔闪烁光线,他们可以控制机器人的方向和速度。
Swimming requires a lot of muscle.
But MIT engineers have found that, with the right design, even a single layer of muscle cells can generate propulsion in water. In a paper published in Advanced Functional Materials, the team demonstrated a design for a thin, muscle-driven swimming robot. The underwater robot's skeleton is made from a layer of gel film, about the length and width of a piece of chewing gum. The two halves of the gel form the robot's fins, and each side of the fin is covered with a layer of living muscle cells far thinner than a human hair. These cells are genetically engineered to contract in response to light. When the researchers shine light on one fin, the muscle on its surface contracts, causing the entire fin to flap and generating enough force to drag the robot across the water's surface. By flashing light on the two fins at different intervals, they can control the robot's direction and speed.

第一个二维肌肉驱动机器人
工程师们展示了这个纸片薄的机器人能够游过并转弯穿过一个简单的水下迷宫。它最快时每分钟游过约自身长度的四倍。与奥运会游泳运动员每分钟能游65个身长相比,这速度很慢。但MIT机械工程副教授Ritu Raman说:“在水中移动比在空气中需要更大的力。考虑到它的尺寸,这个机器人相当强壮。”该机器人是第一个非常薄的、二维的、肌肉驱动且能运动的机器人示例。Raman表示,目前来自他们团队和其他团队的生物混合机器人都是由庞大的三维实验室培养骨骼肌块构成的,需要数百万个细胞来制造。更薄、更不笨重的设计可能建造成本更低,移动效率更高。“我们相信,由活体肌肉驱动的生物混合机器人有朝一日可以执行精细工作,比如探索对传统硬件来说过于脆弱或不可预测的环境,因为活体组织柔软、对周围环境有响应,并且能够自我修复。”
The first two-dimensional muscle-driven robot
The engineers showed that this paper-thin robot can swim and turn through a simple underwater maze. At its fastest, it swims about four times its own length per minute. Compared with an Olympic swimmer, who can swim 65 body lengths per minute, this is slow. But Ritu Raman, an associate professor of mechanical engineering at MIT, said: "Moving in water requires more force than moving in air. Considering its size, this robot is quite strong." The robot is the first example of a very thin, two-dimensional, muscle-driven robot capable of locomotion. Raman said that current biohybrid robots from her team and others are built from bulky three-dimensional lab-grown blocks of skeletal muscle, requiring millions of cells to make. Thinner, less bulky designs could be cheaper to build and more efficient to move. "We believe that biohybrid robots driven by living muscle could one day perform delicate work, such as exploring environments that are too fragile or unpredictable for conventional hardware, because living tissue is soft, responsive to its surroundings, and able to self-heal."
优化骨架和训练肌肉
去年,Raman的团队开发了一种受虹膜启发的盘状人工肌肉组织。他们在凝胶盘上压印了同心和径向凹槽图案,并将活体肌肉细胞沉积在凝胶表面。细胞沿着凹槽形成薄层,当被光刺激时,细胞以拉伸和挤压盘子的模式移动,类似于人类虹膜扩张和收缩瞳孔。那项工作首次证明肌肉细胞可以生长在非常薄的层中,并以复杂的模式在受到刺激时向多个可控方向移动。
Raman说:“人们以前没见过这种从零开始设计的肌肉架构。细胞在多个方向移动,但它们只移动了约100微米。从机器人的角度来看,它们的运动很微小。”
在新工作中,团队旨在最大化肌肉运动以产生更大的力,足以驱动一个游泳机器人。关键,他们发现,是优化细胞生长的骨架。在之前的虹膜启发设计中,他们在纤维蛋白上培养肌肉细胞,这是一种超软凝胶,团队意识到它会在肌肉产生的力下迅速萎缩。为了更好地支持细胞并最大化其力量,研究人员专注于通过改变三个属性来调整底层凝胶:凝胶的组成、其刚度,以及压印在其中的凹槽的大小和形状。
他们发现,当肌肉细胞沉积在每种带凹槽的凝胶上时,细胞在更接近方形而非弯曲的凹槽中排列整齐。排列更整齐的细胞倾向于融合成纤维,进而形成更强壮、更协调的肌肉组织。他们用GelMA代替纤维蛋白,发现细胞在更硬的凝胶上排列更好,产生的力最大。团队还改变了凝胶厚度,发现半毫米薄的GelMA薄膜为单层肌肉细胞提供了良好的支撑。
最后,团队用闪烁光的训练程序来“锻炼”肌肉。有了增强的细胞和优化的凝胶,团队设计了一个薄的双鳍机器人。Raman说:“你可以把机器人想象成有两个独立的肌肉。如果我们只照亮一个,只有那个肌肉运动。如果照亮两个,它们都会拍动。”研究者将机器人浸入一个大型培养皿的水中,手动在机器人上方移动光源。机器人跟随光线,拍动鳍穿过团队放置在培养皿中的迷宫。目前的设计在形式上相对基础。
研究者的意图首先是展示机器人能产生足够的力来游泳。Raman说:“我们的下一个目标是优化身体设计,以实现更快的游泳速度。但即使在慢速游泳下,人们也可以想象一个肌肉驱动的游泳者被用于水生环境监测等目的。”
Optimizing the skeleton and training the muscle
Last year, Raman's team developed an iris-inspired disc-shaped artificial muscle tissue. They imprinted concentric and radial groove patterns onto a gel disc and deposited living muscle cells on the gel surface. The cells formed thin layers along the grooves, and when stimulated by light, the cells moved in patterns that stretched and squeezed the disc, similar to how the human iris dilates and constricts the pupil. That work was the first to prove that muscle cells can be grown in very thin layers and, when stimulated, move in complex patterns in multiple controllable directions.
Raman said: "People had not seen this kind of muscle architecture designed from scratch before. The cells moved in multiple directions, but they only moved about 100 micrometers. From a robot's perspective, their movement was very small."
In the new work, the team aimed to maximize muscle movement to generate greater force, enough to drive a swimming robot. The key, they found, was optimizing the skeleton on which the cells grow. In the previous iris-inspired design, they cultured muscle cells on fibrin, an ultra-soft gel that the team realized would quickly shrink under the force generated by the muscle. To better support the cells and maximize their force, the researchers focused on tuning the underlying gel by changing three properties: the gel's composition, its stiffness, and the size and shape of the grooves imprinted in it.
They found that when muscle cells were deposited on each type of grooved gel, the cells aligned neatly in grooves that were closer to square rather than curved. More neatly aligned cells tended to fuse into fibers, which in turn formed stronger, more coordinated muscle tissue. They replaced fibrin with GelMA and found that cells aligned better on stiffer gels and generated the greatest force. The team also varied gel thickness and found that a half-millimeter-thin GelMA film provided good support for a single layer of muscle cells.
Finally, the team used a flashing-light training program to "exercise" the muscle. With enhanced cells and an optimized gel, the team designed a thin, two-finned robot. Raman said: "You can think of the robot as having two independent muscles. If we illuminate only one, only that muscle moves. If we illuminate both, they both flap." The researchers immersed the robot in water in a large petri dish and manually moved a light source above the robot. The robot followed the light, flapping its fins through a maze the team placed in the dish. The current design is relatively basic in form.
The researchers' intention was first to show that the robot can generate enough force to swim. Raman said: "Our next goal is to optimize the body design to achieve faster swimming speeds. But even at slow swimming speeds, one can imagine a muscle-driven swimmer being used for purposes such as aquatic environmental monitoring."
